Dry grinding produces dust which must be extracted and filtered out as near as possible to the site where it originates. For this purpose Bohle offers powerful filtering systems especially designed for extracting aggressive glass dust. Used together with Bohle twin belt grinding machines, these filt
Before replacing the dust collection bag (material: PE-LD), the lockable castors must be locked, the locking bolt on the intake connection lifted and the intake hose pulled off. To remove the filled dust collection bag, tilt the upper part of the unit towards the fan after opening the locking buckle.
To remove the dust collection bag, it is carefully pulled upwards and squeezed approx. 30 cm below the upper edge of the bag.
This 30 cm is folded over once about 15 cm to the top edge, closed with the supplied tape, removed from the container and disposed of according to local regulations.
When inserting a new dust collection bag, make sure that it lies smoothly against the walls of the container and wrinkles as little as possible at the top edge. The unit is switched off again, the upper part of the unit is folded shut and the fastening buckle is closed. The unit is switched on again. The unit remains switched on until the dust collection bag has completely settled against the wall of the container. This process takes about one minute. Make sure that the dust collection bag does not form a collar in the upper area where dust could collect. The suction hose is plugged in and locked. The unit is ready for operation again.
