Overpanel fitting PT 30.3 with 15 mm Ø bolt is used with corner fitting PT 20 and thus connects overpanel and door in an all-glass system. The screw-on plate for wall mounting is included in the scope of delivery. The pivot point can be set to 55 or 65 mm
Whether single or double-leaf doors, the combination with overpanels and/or side panels... there are many ways to create a bright and open atmosphere with a room divider in private, commercial or public spaces. The door can be designed as a swing or as a rebate door.
Application note:
The glass cut-out is measured for a wall distance of 6 mm; if the wall distance is different, the glass cut-out must be adjusted accordingly. Please use the following combinations of inserts for the following glass thicknesses: 2 x 2+1 mm for 8 mm glass, 2 x 2 mm for 10 mm glass, 2 x 1 mm for 12 mm glass.
