No results were found for the filter!
BO 5213850
The patch lock is equipped with a profile cylinder cover plate on one side and can be installed both in the upper and the lower corner area. The fitting is suited for swinging, sliding and one-side opening doors made of glass.
BO 5206754
The Studio glass door hinge stands out thanks to its high quality surfaces and a classy design for interior doors. It offers numerous advantages, such as wear resistant polyisocyanate springs, a noise absorbing whisper latch, a slimline...
BO 5206760
The Studio glass door hinge stands out thanks to its high quality surfaces and a classy design for interior doors. It offers numerous advantages, such as wear resistant polyisocyanate springs, a noise absorbing whisper latch, a slimline...
BO 5216622
The Alva self-closing patch fitting from Bohle enables a quickinstallation without troublesome floor excavations which cause a lot of dirt. As the entire technology is concealed inside the slimline fitting, opening the screed for...
BO 5206654
The three-part stainless steel glass door hinge is equipped with maintenance-free sliding bearings for high carrying capacity. Thanks to its high quality workmanship and its square design, it enhances the appearance of any glass door....
BO 5206804
If a door (10 mm tempered glass; 10.76 mm laminated safety glass) with a rebate depth of 24 mm is used, the latch must be exchanged in the lock. Milled latch
BO 5206590
Thanks to their reliable and sturdy quality, the locks and door hinges of the Olis and Alea ranges are the ideal fit for project applications with high frequency use doors.
BO 5206591
Thanks to their reliable and sturdy quality, the locks and door hinges of the Olis and Alea ranges are the ideal fit for project applications with high frequency use doors.
BO 5206594
Thanks to their reliable and sturdy quality, the locks and door hinges of the Olis and Alea ranges are the ideal fit for project applications with high frequency use doors.
BO 5206595
Thanks to their reliable and sturdy quality, the locks and door hinges of the Olis and Alea ranges are the ideal fit for project applications with high frequency use doors.
BO 5216610
Suitably dimensioned cover cap for self-closing patch fitting Alva Standard Duty with plastic bushing for 15 mm diameter pin Glass thickness tempered glass 8 -12.7 mm
BO 5216600
The Alva self-closing patch fitting from Bohle enables a quickinstallation without troublesome floor excavations which cause a lot of dirt. As the entire technology is concealed inside the slimline fitting, opening the screed for...
Recently viewed