The mirror adhesive offers fast curing and good initial adhesion. It is low-emission, silicone- and isocyanate-free and therefore easy to use. Tension-free installation of mirrors according to DIN EN 1036 is possible on all common building substrates, without any problems.
Xtragrip® MS Polymer is a mirror adhesive with a very good initial tack. It is suitable for tension-absorbing mirror bonding as per DIN EN 1036 on all common substrates. Xtragrip® MS Polymer stands out due to its fast curing speed of 2-3 mm/ 24 hours. The adhesive is neutral and free from silicone and isocyanate. It has excellent low-emission properties and is EC1 PLUS R certified. It does not affect mirror coatings manufactured according to DIN EN 1036. Porous surfaces must be pretreated with a primer. Please observe the application instructions in the technical data sheet and the German Glazing Trade Technical Guideline No. 11 “Mirrors – Installation and Handling” (applicable in Germany).
Application note:
Please note: Safety data sheets can be found in the “Customer Services” section of the website, at the bottom of the page.
