No results were found for the filter!
Clamping Carriage
BO 88.116
Thanks to its six large pneumatic tyres with ball bearings on steel rims, the trolley is also suitable for rough terrain. The middle axle has two push-rod brakes. The trolley and lifting unit can be manipulated together by forklift or...
Transport boxes made of wood for Liftmaster Quadro
SP TVP0065
The lifting equipment can be stored and transported in the wooden box. The wooden box has an intermediate shelf. The extension arms (if any), instruction manual, batteries, charger etc. are stored in this intermediate shelf. The lifting...
Round sling
BO 88.115
With the aid of this round sling (depending on the crane model), the distance between the lifting equipment and the crane can be increased.
Protective Cover for suction pads
SP 88.B0275
Protects the suction pads from contamination and harmful UV radiation. Adjustable for suction pads ranging from ø 180 up to 360 mm
Extension arm including suction pad ø 360 mm
BO 88.AL360
For applications requiring a larger distance between suction pads to minimise the protrusion of materials as far as possible.
Roller set
BO 88.113
The roller set consists of four rollers which can be optionally mounted to the transport rack BO 88.112. For conveniently rolling the Liftmaster Quadro lifting equipment.
Tarpaulin
SP 88.B051
The transport rack tarpaulin of the Liftmaster Quadro lifting equipment offers reliable protection during transport or in the workshop.
Rechargeable battery 12V 3Ah
SP 88.B0214
Replacement/spare battery for the Liftmaster Quadro lifting equipment The battery can be replaced in a few simple steps and without tools. In this way, the lifting equipment can be used uninterruptedly.
Battery Charger 230V - 12V
SP 88.B0254
The charger for the Liftmaster Quadro battery (SP 88.B0214) has been designed for optimum, quick, and gentle charging. The battery quality is maintained, thus ensuring a long service life.
Transport rack
BO 88.112
The handy transport rack for lifting equipment of the Liftmaster Quadro Series. It offers space for the lifter base body and its four extension arms and in addition facilitates both the safe transport in a vehicle and the space-saving...
Suction pads ø 360 mm
BO 88.245
Suction pad specially developed for vertical handling, with ample contact surface to the load Material: black nitrile rubber, 50 Shore For use especially on glass, plastic, wood, stone, and metal.
Extension arm including suction pad ø 305 mm
BO 88.WO280
For applications requiring a larger distance between suction pads to minimise the protrusion of materials as far as possible.
Recently viewed