Article successfully added.

Press Button Set safeclix® 16

Press Button Set safeclix® 16

Technical Data

Safety catch Press Button
Mirror surface 1,6 m²
Load capacity 24 kg
safeclix® 16 is suitable for the quick mounting of mirrors manufactured according to DIN EN... more

safeclix® 16 is suitable for the quick mounting of mirrors manufactured according to DIN EN 1036. The lipped plates are equipped with Xtramount® mirror adhesive tape on both sides. After bonding the plates to the mirror, only a short resting time of 30 minutes is required; the mirror can then be hung up again. The press buttons included in the set secure the mirror against slipping. The mirror can be detached again at all times, if needed. When splinter protection film is used, the area reserved for the lipped plates must not be covered.
Only one set must be used per mirror. In this way, the mirror is fixed on two suspension points. This achieves uniform load distribution over both mirror plates, avoiding optical distortions. Do not use multiple sets per mirror; uneven load distribution can occur when three or more plates are mounted. This may lead to the overload or even the detachment of individual plates. Mirrors must not be mounted overhead using this mounting set , e. g., over a sofa, without additional safeguards.

  • Use only one set per mirror. Do not use multiple sets per mirror!
  • Never mount the mirror in overhead areas.
  • Please always observe the German Glazing Trade Technical Guidelines.
  • The mirror mounting sets are suitable for mirrors as per DIN EN 1036.
  • One set is suitable for a mirror size of max. 1.6 m²
  • The weight of the mirror including all add-on parts must not exceed 24 kg
  • suitable for standard humid environments (not saunas!)
  • Storage at room temperature and approx. 60% relative humidity
  • For durability, see the information on the label.

Additional product information is loading.

What is included in delivery?
Number Unit Description
2x Lipped plates 200 x 100 mm with Xtramount® mirror adhesive tape
2x Eccentric Discs
2x Press buttons
2x Spacers
2x Countersunk and 2 buttonhead screws ø 4 x 50 mm
4x Plugs ø 6 x 36 mm
Alternative products
You may also like these products
Recently viewed