window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments)}; gtag('js', new Date()); gtag('config', 'G-SQE56YB4YF',{'send_page_view': false, 'anonymize_ip': true});

Saveker Sliding Glass Tracking - System Nylonslide; 6 mm

Suitable for 6 mm glass up to 1.5 m high, this system is available in polished aluminium and supplied in 2 or 4 metre stock lengths. Glass panels slide on nylon rollers which are incorporated in the bottom track while the top of the glass is supported in the top track. The system is suitable for use in display cabinets, showcases or serving hatches. The usual overlap allowed between the two glass doors is 26 mm. For glass sizes deduct 22 mm from height of opening. For safety reasons we recommend all glass should have polished edges. Please check with your glass merchant to ensure that the specification of the glass is suitable for the particular installation. For side channels or draught excluders deduct 38 mm from the height of opening. The maximum recommended height to width ratio per door is 1.5:1

Suitable for 6 mm glass up to 1.5 m high, this system is available in polished aluminium and supplied in 2 or 4 metre stock lengths. Glass panels slide on nylon rollers which are incorporated in... read more »
Close window
Saveker Sliding Glass Tracking - System Nylonslide; 6 mm

Suitable for 6 mm glass up to 1.5 m high, this system is available in polished aluminium and supplied in 2 or 4 metre stock lengths. Glass panels slide on nylon rollers which are incorporated in the bottom track while the top of the glass is supported in the top track. The system is suitable for use in display cabinets, showcases or serving hatches. The usual overlap allowed between the two glass doors is 26 mm. For glass sizes deduct 22 mm from height of opening. For safety reasons we recommend all glass should have polished edges. Please check with your glass merchant to ensure that the specification of the glass is suitable for the particular installation. For side channels or draught excluders deduct 38 mm from the height of opening. The maximum recommended height to width ratio per door is 1.5:1

9 Product(s)
Close filters
  •  
  •  
  •  
  •  
No results were found for the filter!
Finger Pull, Round, 6 mm Glass Finger Pull, Round, 6 mm Glass
BO 634003QP
Round finger pull with 18 mm diameter finger hole, fits into 29 mm diameter hole drilled into glass. Available in polished aluminium.
Double Bottom Track, 6 mm glass Double Bottom Track, 6 mm glass
BO 634020P
Double bottom track incorporates nylon rollers on which the glass panel runs. Supplied drilled and countersunk for fixing. Available in polished aluminium, in 2 or 4 metre stock lengths.
Single Top Track / Side Channel, 6 mm glass Single Top Track / Side Channel, 6 mm glass
BO 634021TP
Single top track/side channel can be used either to guide the top of a single sliding door or for sliding door to locate into at the side of the opening, or alternatively can be used to frame a fixed panel. Supplied drilled and...
Double Top / Side Track, 6 mm glass Double Top / Side Track, 6 mm glass
BO 634024P
Double top track/side channel can be used either to guide the top of sliding glass doors or for sliding door to locate into at the side of the opening. Supplied drilled and countersunk for fixing and available in polished aluminium, in...
Edge Clip, 6 mm Glass Edge Clip, 6 mm Glass
BO 634060Q
Clear plastic edging clips onto glass panel to protect the edge, available in 2 or 4 metre stock lengths.
Round Finger Pulls Round Finger Pulls
BO 60HBX14
Round finger pulls nickel plated for 6 mm glass. Fits into 22 mm hole drilled into glass.
Finger Pull, 6 mm Glass Finger Pull, 6 mm Glass
BO 634582P
BO 634582M - Medium round finger pull · polished aluminium · 30 mm ø finger hole · fits into 38 mm ø hole in glass BO 634582P - Large round finger pull · polished aluminium · 38 mm ø finger hole · fits into 51 mm ø hole in glass...
Recently viewed