window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments)}; gtag('js', new Date()); gtag('config', 'G-SQE56YB4YF',{'send_page_view': false, 'anonymize_ip': true});

Saveker Sliding Glass Tracking - System Nylonslide; 10 mm

Suitable for 10 mm glass up to 1.5 m high, this system is available in polished aluminium, supplied in 2 or 4 metre stock lengths. Glass panels slide on nylon rollers which are incorporated in the bottom track while the top of the glass is supported in the top track. The system is suitable for use in display cabinets, showcases or serving hatches where 10 mm glass or taller doors are required. The usual overlap allowed between the two glass doors is 26 mm. For glass sizes deduct 24 mm from height of opening. For safety reasons we recommend all glass should have polished edges. Please check with your glass merchant to ensure that the specification of the glass is suitable for the particular installation. For side channels or draught excluders deduct 40 mm from the height of the opening. The maximum recommended height to width ratio per door is 1.5:1.

Suitable for 10 mm glass up to 1.5 m high, this system is available in polished aluminium, supplied in 2 or 4 metre stock lengths. Glass panels slide on nylon rollers which are incorporated in the... read more »
Close window
Saveker Sliding Glass Tracking - System Nylonslide; 10 mm

Suitable for 10 mm glass up to 1.5 m high, this system is available in polished aluminium, supplied in 2 or 4 metre stock lengths. Glass panels slide on nylon rollers which are incorporated in the bottom track while the top of the glass is supported in the top track. The system is suitable for use in display cabinets, showcases or serving hatches where 10 mm glass or taller doors are required. The usual overlap allowed between the two glass doors is 26 mm. For glass sizes deduct 24 mm from height of opening. For safety reasons we recommend all glass should have polished edges. Please check with your glass merchant to ensure that the specification of the glass is suitable for the particular installation. For side channels or draught excluders deduct 40 mm from the height of the opening. The maximum recommended height to width ratio per door is 1.5:1.

4 Product(s)
Close filters
  •  
  •  
No results were found for the filter!
Clip on security lock Clip on security lock
BO 634937C1
Clip on security lock for 10 mm glass
Draught Excluder/Edge Clip, 10 mm Glass Draught Excluder/Edge Clip, 10 mm Glass
BO 634060T
BO 634060T - Clear plastic edging clips onto glass panel to protect the edge. Available in 2 metre stock lengths. BO 634056T - Clear plastic draught excluder clips onto edge of the glass panel to prevent draughts and dust. Available...
Finger Pull, medium round, 10 mm Glass Finger Pull, medium round, 10 mm Glass
BO 634359MP
Medium round finger pull with 25 mm finger hole, fits into 38 mm diameter hole drilled into glass. Available in polished aluminium.
Finger pull, large round, 10 mm Glass Finger pull, large round, 10 mm Glass
BO 634359P
Large round finger pull with 38 mm finger hole, fits into 51mm diameter hole drilled into glass. Available in polished aluminium.
Recently viewed