window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments)}; gtag('js', new Date()); gtag('config', 'G-SQE56YB4YF',{'send_page_view': false, 'anonymize_ip': true});

Saveker Sliding Glass Tracking - System Heavislide

Suitable for 10 mm glass up to 2.5 m high, this system is available in polished aluminium, supplied in 2 or 4 metre stock lengths. Glass panels slide on nylon rollers which are incorporated in the bottom track while the top of the glass is supported in the top track. The system is suitable for use in display cabinets, showcases or serving hatches where 10 mm glass or taller doors are required. The usual overlap allowed between the two glass doors is 26 mm. For glass sizes deduct 45 mm from height of opening. For safety reasons we recommend all glass should have polished edges. Please check with your glass merchant to ensure that the specification of the glass is suitable for the particular installation. For side channels or draught excluders deduct 76 mm from the height of the opening. The maximum recommended height to width ratio per door is 2:1.

Suitable for 10 mm glass up to 2.5 m high, this system is available in polished aluminium, supplied in 2 or 4 metre stock lengths. Glass panels slide on nylon rollers which are incorporated in the... read more »
Close window
Saveker Sliding Glass Tracking - System Heavislide

Suitable for 10 mm glass up to 2.5 m high, this system is available in polished aluminium, supplied in 2 or 4 metre stock lengths. Glass panels slide on nylon rollers which are incorporated in the bottom track while the top of the glass is supported in the top track. The system is suitable for use in display cabinets, showcases or serving hatches where 10 mm glass or taller doors are required. The usual overlap allowed between the two glass doors is 26 mm. For glass sizes deduct 45 mm from height of opening. For safety reasons we recommend all glass should have polished edges. Please check with your glass merchant to ensure that the specification of the glass is suitable for the particular installation. For side channels or draught excluders deduct 76 mm from the height of the opening. The maximum recommended height to width ratio per door is 2:1.

14 Product(s)
Close filters
  •  
  •  
1 From 2
No results were found for the filter!
Finger Pull, round, 10 mm Glass Finger Pull, round, 10 mm Glass
BO 634003TP
Round finger pull with 18 mm diameter finger hole, fits into 29 mm diameter hole drilled into glass. Available in polished aluminium.
Brush Draught Excluder, 10 mm Glass Brush Draught Excluder, 10 mm Glass
BO 634041P
Brush draught excluder clips onto edge of glass panel to prevent draughts and dust. Available in polished aluminium, in 2 metre stock lengths.
Stop Blocks, 10 mm Glass Stop Blocks, 10 mm Glass
BO 6340422
Top channel stop blocks screw into the top channel giving extra security by preventing closed glass panels being lifted out.
Pull, 10 mm glass Pull, 10 mm glass
BO 6340163P
Available in polished aluminium, in 2 metre stock lengths. BO 6340163P - Pull edging channel clips onto glass panel to protect the edge and also provides a full length finger pull.
Draught Excluder/Edge Clip, 10 mm Glass Draught Excluder/Edge Clip, 10 mm Glass
BO 634060T
BO 634060T - Clear plastic edging clips onto glass panel to protect the edge. Available in 2 metre stock lengths. BO 634056T - Clear plastic draught excluder clips onto edge of the glass panel to prevent draughts and dust. Available...
Bedding Strip, 10 mm Glass Bedding Strip, 10 mm Glass
BO 634141C
Bedding strip helps to secure glass firmly into runner section, available by the metre or in full roll of 25 metres.
Double Top / Side Track, 10 mm Glass Double Top / Side Track, 10 mm Glass
BO 634346AP
Double top track/side channel can be used either to guide the top of sliding glass doors or for sliding door to locate into at the side of the opening. Supplied drilled and countersunk for fixing and available in polished aluminium, in...
Runner, 10 mm Glass Runner, 10 mm Glass
BO 634346BP
Runner accomodates the glass panel in the top half and holds the wheels and end stops in the lower section. Available in polished aluminium, in 2 or 4 metre stock lengths.
Wheel Units, 10 mm Glass Wheel Units, 10 mm Glass
BO 634346C
Steel ball bearing wheels in steel case should be fitted into BO 634346BP runner section, one at each end up to 0.6 sq m of glass, two at each end up to 1 sq m. This is a guidance only. The number of wheels required for any individual...
Double Bottom Track, 10 mm Glass Double Bottom Track, 10 mm Glass
BO 634346EP
Double bottom track is supplied drilled and countersunk for fixing and is available in polished aluminium, in 2 or 4 metre stock lengths. Please note colour anodising and powder coating will wear to silver when in contact with the...
End Stops, 10 mm Glass End Stops, 10 mm Glass
BO 634346DP
End stop with or without rubber buffer fits into end of runner section - available in polished aluminium.
Finger Pull, medium round, 10 mm Glass Finger Pull, medium round, 10 mm Glass
BO 634359MP
Medium round finger pull with 25 mm finger hole, fits into 38 mm diameter hole drilled into glass. Available in polished aluminium.
1 From 2
Recently viewed