window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments)}; gtag('js', new Date()); gtag('config', 'G-SQE56YB4YF',{'send_page_view': false, 'anonymize_ip': true});

Saveker Sliding Glass Tracking - System Freeslide

Suitable for 6 mm glass up to 1.5 m high, this system is available in polished aluminium, in 2 or 4 metre stock lengths. Glass panels are located with bedding strip into a runner section that incorporates either nylon or steel ball bearing wheels. These wheels run along a neat bottom track while the top of the glass is supported in the top track. This system is suitable for use in display cabinets, showcases or service hatches. The usual overlap allowed between two glass doors is 26 mm. For glass cutting sizes deduct 27 mm from the height of the opening. For safety reasons we recommend all glass should have polished edges. Please check with your glass merchant to ensure that the specification of the glass is suitable for the particular installation. To calculate the length of side channels or draught excluders deduct 47 mm from the opening height. The maximum recommended height to width ratio of each door is 2:1.

Suitable for 6 mm glass up to 1.5 m high, this system is available in polished aluminium, in 2 or 4 metre stock lengths. Glass panels are located with bedding strip into a runner section that... read more »
Close window
Saveker Sliding Glass Tracking - System Freeslide

Suitable for 6 mm glass up to 1.5 m high, this system is available in polished aluminium, in 2 or 4 metre stock lengths. Glass panels are located with bedding strip into a runner section that incorporates either nylon or steel ball bearing wheels. These wheels run along a neat bottom track while the top of the glass is supported in the top track. This system is suitable for use in display cabinets, showcases or service hatches. The usual overlap allowed between two glass doors is 26 mm. For glass cutting sizes deduct 27 mm from the height of the opening. For safety reasons we recommend all glass should have polished edges. Please check with your glass merchant to ensure that the specification of the glass is suitable for the particular installation. To calculate the length of side channels or draught excluders deduct 47 mm from the opening height. The maximum recommended height to width ratio of each door is 2:1.

19 Product(s)
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 2
No results were found for the filter!
Security Lock Security Lock
BO 634955P
Security lock to fit 22 m hole - for 6 mm or 10 mm glass
Finger Pull, Round, 6 mm Glass Finger Pull, Round, 6 mm Glass
BO 634003QP
Round finger pull with 18 mm diameter finger hole, fits into 29 mm diameter hole drilled into glass. Available in polished aluminium.
Bedding Strip, 6 mm Glass Bedding Strip, 6 mm Glass
BO 6340136
Bedding strip helps secure glass firmly into runner section. Available by the meter of in full rolls of 30 metres.
Single Top Track / Side Channel, 6 mm glass Single Top Track / Side Channel, 6 mm glass
BO 634021TP
Single top track/side channel can be used either to guide the top of a single sliding door or for sliding door to locate into at the side of the opening, or alternatively can be used to frame a fixed panel. Supplied drilled and...
Brush Draught Excluder, 6 mm Glass Brush Draught Excluder, 6 mm Glass
BO 634030P
Brush draught excluder clips onto edge of glass panel to prevent draughts and dust. Available in polished aluminium, in 2 or 4 metre stock lengths
Edging Channel, 6 mm Glass Edging Channel, 6 mm Glass
BO 634031P
BO 634031P - Edging channel clips onto glass panel to protect the edge. Available in polished aluminium, in 2 metre stock lengths.
Stop Blocks, 6 mm Glass Stop Blocks, 6 mm Glass
BO 6340439
Top channel stop block screws into the top track and provides addtional security by preventing closed glass panels from being lifted out.
Edge Clip, 6 mm Glass Edge Clip, 6 mm Glass
BO 634060Q
BO 634060Q - Clear plastic edging clips onto glass panel to protect the edge, available in 2 metre stock lengths.
Double Top / Side Track, 6 mm glass Double Top / Side Track, 6 mm glass
BO 634579AP
Double top/track side channels can be used either to guide the top of sliding glass doors for a sliding door to locate into at the side of the opening. Supplied drilled and countersunk for fixing, and available in polished aluminium,...
Runner, 6 mm glass Runner, 6 mm glass
BO 634579BP
Runner accomodates the glass panel in the top half and holds the wheels and end stops in the lower section. Available in polished aluminium, in 2 or 4 metre stock lengths.
End Stops, 6 mm Glass End Stops, 6 mm Glass
BO 634579DP
End stop with or without rubber buffer fits into end of runner section - available in polished aluminium.
1 From 2
Recently viewed