No results were found for the filter!
Mono Block Drill / Countersink in all Desired Dimensions
BO 5014H40U
For high quality requirements, and with excellent cutting characteristics, the upper drill diameter is 0.2mm bigger than the lower drill giving an absolutely continuous drill hole - when all machine specifications are observed the drill...
Segmental Diamond Drills
BO 5004100
Adjustable · with exchangeable segments · central bore hole for coolant supply Connection thread (Continental) R 1/2"
Diamond Countersinks, Industrial Quality
BO 5001520
Other diameters on request Outer thread (Continental) R 1/2"
Grinding Cone Holder
BO 79.610
Elastic Vulkozell® body · transverse slits for attaching and exchanging the grinding cones BO 79.6120 (ø60 mm) / BO 79.9120 (ø90 mm) · Made in Germany Shaft ø 6 mm
Grinding Cone
BO 79.6120
The grinding cone is used to arris drilled holes and cut-outs in glass or similar materials such as ceramic or stone. It can be used on machines suitable for wet working, e.g. cordless drivers or pneumatic power drills, which rotate...
Spear Point Glass Drill
BO 5000205
Specially ground carbide tip with specially sharpened tip for precise drilling results Finish chromate
Diamond Core Drills, Industrial Quality
BO 5001402
For highest requirements · high drilling capacity and service life · drill base made of stainless steel · diamond coating from sintered material · with slots for better cooling · pre-sharpened, ready-to-use Outer thread (Continental)...
Diamond Core Drills with Countersink, Industrial Quality
BO 5001605
For the highest requirements · high drilling capacity and service life · drill base made of stainless steel · diamond coating from sintered material · with slots for better cooling · pre-sharpened, ready-to-use · special dimensions on...
Diamond Core Drills, Standard Quality
BO 5000403
For normal use · drill base made of steel · covered with protective lacquer · diamond coating from sintered material · drill has to be sharpened before first use Outer thread (Continental) R 1/2"
Diamond Core Drill with Countersink, Standard Quality
BO 5000604
For normal use · drill base made of steel · covered with protective lacquer · diamond coating from sintered material · countersink is fixed by lateral clamping screw · drill has to be sharpened before first use. Outer thread...
Diamond Hollow Drills for Ceramic
BO 79.3605
Developed especially for the Bohle Aqua Drill wet drilling machine · manual drill bit exchange without tools · for drilling hard ceramic tiles, granite, marble and regular tiles Belgian thread 1/2"
Recently viewed