No results were found for the filter!
Carbide is a very popular material for steel nozzles as it is especially hard and wear-resistant. It reaches approx. 25% of the wear resistance of boron carbide, but offers the advantage of being much tougher and thus break-proof.
Boron Carbide Sandblasting Nozzles
As the third hardest material after diamonds and CBN (cubic boron nitride), boron carbide is optimally suited for blasting nozzles used for highly-abrasive agents, such as: corundum, silicon carbide, and aluminium oxide.
High Grade Corundum Sandblasting Agent
High quality abrasive · smooth blasting pattern and soft transitions · low dust loss rates High grade corundum forms part of the group of electric corundums. It is made of aluminium oxide in a reducing melting atmosphere of an...
Sandblast Resist Tape, 100 µm
For transferring plotter templates self-adhesive sandblast resist tape for sandblasting on smooth substrates, e.g. glass or polished stone, with a low blasting depth of up to 0.5 mm available either as a roll or in a package with 10...
Sandblast Resist Tape, 180 µm
The ideal sandblast resist tape for working with higher blasting depth, ideally suited for relief structures, logos and lettering with sharp outlines. self-adhesive sandblast resist tape for sandblasting on smooth substrates, e.g....
Brown corundum forms part of the group of electric corundums. It is made of calcined bauxite in a reducing melting atmosphere of an electric arc furnace. Brown corundum is non-ferrous and extremely stable. Colour Brown
Transfer Foil / Paper
A transfer foil or transfer paper must be applied to sandblast resist tape before it is cut in a plotter to prevent stencils from detaching too early. Once the stencil film has been applied, the transfer foil / paper can be removed for...
VS 8 adaptor nozzle
Boron carbide adaptor nozzle, with aluminium coating, for 30 mm collar connection, ø 8 mm x L 40.5 mm