Consumables

As in the past, glass drilling machines with manual feed are part of the basic equipment of every glazier's workshop. These machines are indispensable, particularly for the universal processing of small and medium sized glass panes in small quantities. Because the requirements are diverse, in this section Bohle offers double-sided as well as basic one-sided tabletop drilling machines. These machines are very sturdy and easy to adjust.

As in the past, glass drilling machines with manual feed are part of the basic equipment of every glazier's workshop. These machines are indispensable, particularly for the universal processing of... read more »
Close window
Consumables

As in the past, glass drilling machines with manual feed are part of the basic equipment of every glazier's workshop. These machines are indispensable, particularly for the universal processing of small and medium sized glass panes in small quantities. Because the requirements are diverse, in this section Bohle offers double-sided as well as basic one-sided tabletop drilling machines. These machines are very sturdy and easy to adjust.

27 Product(s)
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 3
No results were found for the filter!
Diamond Countersinks, Industrial Quality Diamond Countersinks, Industrial Quality
BO 5001570
The optimized spiral form follows function - means inside sintered 6mm thick diamond section are spiral form slots for coolant water and glass abrasion sludge. Outer thread (Continental) R 1/2"
Sharpening Stone for Diamond Drills Sharpening Stone for Diamond Drills
BO 5000499B
By drilling powerfully into the sharpening stone a few times, new spaces are created between the diamond particles, leading to renewed cutting ability · if sharpening does not lead to a positive result, use the dressing stone first ·...
Victory diamond countersink Victory diamond countersink
BO 5001550E
Diamond countersink Ø 15/50 mm, slotted/5 section, industrial standard, 1/2" connection thread Outer thread (Continental) R 1/2"
Milling Cutter for Glass Tubes Milling Cutter for Glass Tubes
BO BF1316
Combination tool for drilling + milling Customised diameter Can be reused several times Thread 1/2"
Diamond Core Drills with Deep Countersink, Industrial Quality Diamond Core Drills with Deep Countersink, Industrial...
BO 5001806
The quality demands placed on deeply countersunk bores in combination with shorter cycle times per countersink have continually grown, particularly in the fields of facade construction and interior fit-out. Bohle has now brought its...
Mono Block Drill / Countersink in all Desired Dimensions Mono Block Drill / Countersink in all Desired Dimensions
BO 5014H40U
For high quality requirements, and with excellent cutting characteristics, the upper drill diameter is 0.2mm bigger than the lower drill giving an absolutely continuous drill hole - when all machine specifications are observed the drill...
Segmental Diamond Drills Segmental Diamond Drills
BO 5004100
Adjustable · with exchangeable segments · central bore hole for coolant supply Connection thread (Continental) R 1/2"
Diamond Countersinks, Industrial Quality Diamond Countersinks, Industrial Quality
BO 5001520
Other diameters on request Outer thread (Continental) R 1/2"
Diamond Countersinks Diamond Countersinks
BO 5000535
Outer thread (Continental) R 1/2"
Grinding Cone Holder Grinding Cone Holder
BO 79.610
Elastic Vulkocell® body · transverse slits for attaching and exchanging the grinding cones BO 79.6120 (ø60 mm) / BO 79.9120 (ø90 mm) · Made in Germany Shaft ø 6 mm
Grinding Cone Grinding Cone
BO 79.6120
The grinding cone is used to arris drilled holes and cut-outs in glass or similar materials such as ceramic or stone. It can be used on machines suitable for wet working, e.g. cordless drivers or pneumatic power drills, which rotate...
Spear Point Glass Drill Spear Point Glass Drill
BO 5000205
Specially ground carbide tip with specially sharpened tip for precise drilling results Finish chromate
1 From 3
Recently viewed