Accessories

Here you will find suitable wall mounting hardware for lipped plates. Please note that mirror magnets must only be used for tested metal plates with a thickness of 2 mm. All screws and dowels must be selected according to the substrate. Different kinds of spacers prevent the mirror from bending or increase the wall distance, e. g. for placing lighting elements behind the mirror. Please observe the corresponding mounting instructions as regards compatibility and distances, etc., for all accessories (lamps, mirror demisting pads, splinter protection films, etc.).

Here you will find suitable wall mounting hardware for lipped plates. Please note that mirror magnets must only be used for tested metal plates with a thickness of 2 mm. All screws and dowels must... read more »
Close window
Accessories

Here you will find suitable wall mounting hardware for lipped plates. Please note that mirror magnets must only be used for tested metal plates with a thickness of 2 mm. All screws and dowels must be selected according to the substrate. Different kinds of spacers prevent the mirror from bending or increase the wall distance, e. g. for placing lighting elements behind the mirror. Please observe the corresponding mounting instructions as regards compatibility and distances, etc., for all accessories (lamps, mirror demisting pads, splinter protection films, etc.).

11 Product(s)
No results were found for the filter!
Spacers Plinto Spacers Plinto
BO 5121100
The Plinto spacer is ideally suited for use with concealed mirror hanging systems. Thanks to the precise adjustment to the millimetre, mounting and aligning windows, doors and so on becomes as easy as can be. Plinto is available in two...
Eccentric disc Eccentric disc
BO 5208602
Eccentric discs are supplied with adjustment scale. The necessary height adjustment (+/- 4 mm = 8 mm) can immediately be read from the front of the disc. Height 12 mm Diameter 37 mm Packaging unit 10 items
Press Button self-adhesive Press Button self-adhesive
BO 5208611
For fixing and securing of mirrors, whilst providing anti-jump and unhinging protection · self-adhesive · pull-off force of press button approx. 1.8 kg ± 0.3 kg Height 13 mm Diameter 50 mm Packaging unit 10 items
Mirror magnets eccentric drill hole, 5 mm diameter Mirror magnets eccentric drill hole, 5 mm diameter
BO 5208601
The shear strength is calculated and tested for vertical mounting of mirrors with our metal plates of 2 mm thickness (see also "Note on the load capacity of the plates"). eccentric drill hole, 5 mm diameter Height 12.3 mm Diameter...
Mounting plate made of steel Mounting plate made of steel
BO 5208614
With elongated hole for height adjustment up to approx. 20 mm and two additional fixing holes galvanised sheet steel Packaging unit 10 items
Spacer 20 x 20 x 13 mm high strength rigid foam Spacer 20 x 20 x 13 mm high strength rigid foam
BO 5208600
Self-adhesive coating on one side · prevents deflection of large mirrors Size 20 x 20 x 12 mm high strength rigid foam
Spacers self-adhesive grey Height 13.2 mm Diameter 20.6 mm Spacers self-adhesive grey Height 13.2 mm Diameter 20.6 mm
BO 5208603
Self-adhesive Diameter 20.6 mm Height 13.2 mm Packaging unit 100 items
Mirror Screws with screw-on cover caps Mirror Screws with screw-on cover caps
BO 5200079
Glass thickness 5 - 6 mm ø 20 mm Packaging unit 4 items
Mirror Screws pointed Mirror Screws pointed
BO 5200980
Material brass Threaded pin 1/8" Thread length 7 mm Cap height 4 mm Packaging unit 100 items ø 19 mm
Wood Screws for pointed domeheads and flatheads Wood Screws for pointed domeheads and flatheads
BO 5200984
Finish galvanised Inner thread 1/8" Packaging unit 100 items
Protective Sleeve Protective Sleeve
BO 5200988
For avoiding direct contact between wood screw and mirror when using mirror screws · sales unit = 100 items Drill hole in glass ø7 mm
Recently viewed