No results were found for the filter!
Diamond Core Drills, Industrial Quality
BO 5001402
BO 5001402
For highest requirements · high drilling capacity and service life · drill base made of stainless steel · diamond coating from sintered material · with slots for better cooling · pre-sharpened, ready-to-use Outer thread (Continental)...
Diamond Core Drills with Countersink, Industrial Quality
BO 5001605
BO 5001605
For the highest requirements · high drilling capacity and service life · drill base made of stainless steel · diamond coating from sintered material · with slots for better cooling · pre-sharpened, ready-to-use · special dimensions on...
Diamond Core Drills, Standard Quality
BO 5000403
BO 5000403
For normal use · drill base made of steel · covered with protective lacquer · diamond coating from sintered material · drill has to be sharpened before first use Outer thread (Continental) R 1/2"
Diamond Hollow Drills for Ceramic
BO 79.3605
BO 79.3605
Developed especially for the Bohle Aqua Drill wet drilling machine · manual drill bit exchange without tools · for drilling hard ceramic tiles, granite, marble and regular tiles Belgian thread 1/2"
Set of Diamond Hollow Drills for Ceramic
BO 79.361
BO 79.361
With one ceramic diamond hollow drill each with diameters of 6, 8, 10 and 12 mm · drill core ejector and pin for releasing tight drills
Sharpening Stone for Diamond Drills
BO 5000499
BO 5000499
By drilling powerfully into the sharpening stone a few times, new spaces are created between the diamond particles, leading to renewed cutting ability · if sharpening does not lead to a positive result, use the dressing stone first...
Diamond Drill Box / Empty box
BO 79.360
BO 79.360
For safely storing 4 diamond hollow drills for ceramic (not included) BO 79.3606 up to BO 79.3612 · includes drill core ejector and pin for releasing tight drills
Dressing Stone for Diamond Drills
BO 5000498
BO 5000498
Removes used particles and creates a new cutting edge · after using the dressing stone, sharpen the drill with sharpening stone BO 5000499 · when drills are operated with little forward feed, no self-sharpening process takes place and...
Recently viewed