VetroMount® floor profile U 1.0 kN (1.5 kN UK)

VetroMount® floor profile U 1.0 kN (1.5 kN UK)

Product number: BO5403010

Description

The VetroMount® floor profile U for surface mounting impresses with its high-quality appearance. Depending on the structural requirements, a maximum screw spacing of 400 mm is all that is needed to securely fasten the profile. By using concrete screws, there is no need to drive in expansion anchors.

The VetroMount® all-glass railing system impresses with its high-quality appearance and simple installation thanks to technically sophisticated components for glass mounting and alignment. With just a few simple steps, even long railing sections can be installed in a time- and cost-saving manner. All accessories such as end caps, cover profiles, spacer rubbers etc. are available to match. For indoor use, we recommend the following screws: Hilti concrete screw HUS3-H 10 x 100 (BO 5211160) or Fischer concrete screw ULTRACUT FBS II 10 x 85. For outdoor use, we recommend the following screws: Hilti concrete screw HUS-HR 10 x 105 (BO 5211161) or Fischer concrete screw ULTRACUT FBS II A4 US 10 x 85. Important for implementation: When using outdoors, particular attention must be paid to drainage and wind loads at the planning stage. You can find the general building authority test certificate (AbP), important information on statics and drainage in the "Downloads" section.

About the product series VetroMount:
Glass railing systems enable maximum transparency in both interior and exterior construction. At the same time, installation should be both safe and intuitive and as time-saving as possible. Thanks to a patented safety mechanism and only a few fastening points for floor mounting, the VetroMount® tested railing system from Bohle meets exactly these expectations: It is safe to mount and at the same time extremely easy and cost-efficient to install.

Show all Show less

Spar load 1.0 kN (UK: 1.5 kN)

Application note:
Test report or country-specific certificate and further information in the downloads.

Your Advantages

Intuitive and time-efficient assembly
Cost-effective fastening
Installation with and without cover profile
System statics available
Suitable for indoor and outdoor use

Simple concrete screws are sufficient
Quick disassembly of the entire pane without damage in the event of an inspection
Easy integration of LED lighting in the profile is possible
Three steps to the perfect railing: insert, align, secure
Tie bar load 1.0 kN
Tested system - Please note the country-specific certificate

Show all Show less

Technical details

Colour

Aluminium colour

Colour standard

Glass thickness LSG

12.76 - 21.52 mm

Glass thickness TSG

15 - 19 mm

Height

130 mm

Inclination adjustable

Yes

Length

5,000 mm

Material

Aluminium

Max. line load

1 kN

Model

Floor profile

Mounting type

Top mounting

Package contents

1 Piece

Product series

VetroMount

Profile geometry

Surface

Anodised

Surface treatment

E6 stained

Width

75 mm

Show all Show less

Downloads

pdf

Instructions

VetroMount® - Instruction Manual

Drawings

jpg

BO5403008-BO5403010-Z1.jpg

jpg

BO_5403008-10_z.jpg

jpg

BO_5403008-11_z1.jpg

jpg

BO_5403008-11_z2.jpg

jpg

BO_5403008-11_z3.jpg

jpg

BO_5403008-11_z4.jpg

jpg

BO_5403008-11_z5.jpg

jpg

BO_5403008-11_z6.jpg

Videos

VetroMount-Montagevideo