GlassBuddy® Plus

Product number: BO5164755

Description

The GlassBuddy® Plus analyses flat glass precisely and non-destructively. Within seconds, the measuring device provides information on glass thickness, pane structure, coatings and their position. Some fire protection gels can also be detected.

Depending on the gap between the panes, the GlassBuddy® Plus can analyse a thickness of up to 100 mm. Satin-finished or sandblasted glass, patterned glass, laminated glass with a matt or heavily tinted film, interference-coated glass and highly reflective glass cannot be measured, or can only be measured to a limited extent. Fire-resistant gels measuring 1.4 mm – 3.2 mm are displayed as “Gel”, whilst those measuring 3.9 mm – 7.0 mm are displayed as “Layer”.Please refer to the user manual. The device does not need to be calibrated regularly, provided that no irregularities occur repeatedly during measurements.

Show all Show less

Technical questions, comments or advice should be sent by E-Mail to glassbuddy@bohle.de.

Application note:
When taking measurements with the GlassBuddy Plus, please note the following: If the device displays the error message ‘too much extraneous light’, the result can be improved by rotating the GlassBuddy by 90°.